Bevels or chamfers can be milled on sheet edges for welding preparation purposes.

The cutting company can setup the preferred bevel with a code.

For example, 35N1 means an angle of 35 degrees with a vertical edge (nose) of 1mm.

Find out how to add a bevelcode:

  1. Select part
  2. Go to the bevels setup menu on the top right corner
  3. Select the edge that needs to be chamfered.
    Tip: Move quickly true the edge selection by using the Tab key
  4. Type bevelcode in the input field
  5. Click 'Apply' to confirm setting

Did this answer your question?