Every project needs general setting for cutting and marking of the parts. Fill in the settings by 

  1. Selecting the project 

  2. Go to the right tab ''Settings" and set up your project 

  3. Stock size plates defines the maximum available plate size that can be cut.

Stock size profiles defines the maximum profile length that is available for cutting.

4. Next, define the grid lines that will be marked.
Grid reverse frame is measured from the base point of your 3D model. From this point the plate thickness direction reverses of the transverse construction.

Grid X = Transverse lines
Grid Y = Longitudinal lines
Grid Z = Horizontal lines or so called waterlines 

5. Choose the cutting company template. Every cutting company has specific settings of there machinery.

Contact [email protected] if your cutter of choice is not available in the list.

Did this answer your question?